Posts

June 2017 Newsletter

Quick Links


Grenfell Tower fire probe focuses on cladding

Fire investigators will focus on how the Grenfell tower blaze spread so rapidly jumping up the exterior of the building from the fourth floor to top in just 15 minutes.

A key area of investigation will be the common rainscreen system used on the Grenfell Tower, which is designed to include fire-breaks at every floor and around every window.

Experts believe this may have failed with the void between the aluminium panels and building fabric acting as a chimney to spread the fire.

The system has been used on many tower block revamps and the Government has now ordered checks on all buildings in the UK that have been revamped in recent years.

Chris Miers, a forensic architect, said: “I was surprised to see the extent of fire and its rapid spread. The risk is if the void is not adequately subdivided it would act as a chimney.”

The building was overclad with Aluminium Composite Material cassette rainscreen. This consists of two thin aluminium sheets sandwiching a core material. The panels are available with polyethylene or less flammable mineral cores.

Russ Timpson of the tall building fire safety network, said: “In the UK cladding has to be of limited combustibility. I’m sure it will be questioned what exactly this means and what these types of cladding systems are adding to the fire load of a building.”

The cladding system employs a void behind the panel to vent moisture. An intumescent strip is designed to be installed at regular intervals to expand in the event of fire to become a cavity barrier.

Cladding contractor Harley Curtain Wall fell into administration shortly after completing the £2.6m Grenfell Tower project.

Main contractor Rydon, which delivered the £8.6m upgrade to the Grenfell Tower in 2016 as part of a £57m borough-wide regeneration in Kensington & Chelsea, said it had met “all required building control, fire regulation and health and safety standards”.

“We will cooperate with the relevant authorities and emergency services and fully support their enquiries into the causes of this fire at the appropriate time.

“Given the ongoing nature of the incident and the tragic events overnight, it would be inappropriate for us to speculate or comment further at this stage.”

Both firms also delivered a bigger project, the Chalcot Estate in north London, which involved using similar systems to reclad five blocks as part of an £18m revamp.

The Chalcot estate in Swiss Cottage consists of 706 homes in five tower blocks -Taplow, Bray, Burnham, Dorney, and Blashford – rising to 23 storeys.

Source: Construction Enquirer

Top of Page


Contractors urged to act on upcoming energy regulations

In less than a year, the government’s new energy bill comes into effect. Ideal Commercial Boilers are urging installers to act now before upcoming changes to the energy efficiency regulations.

From 1 April 2018, landlords of non-domestic rented properties, including public sector landlords, cannot grant a tenancy to new or existing tenants if their property has an EPC rating below E.

A report from global real estate services firm Cushman & Wakefield estimates that nearly 20% of commercial property buildings in England and Wales could fall short of the government’s upcoming energy standards.

Ideal Commercial Boilers see is the change as an opportunity for installers to encourage customers to be proactive before the legislation comes into effect and recommending products and services that will be required in less than a year.

Darren Finley, Chief Commercial Officer at Ideal Commercial Boilers, said: “While replacing an inefficient boiler with an efficient one is the obvious solution, we would also urge contractors to use it as a chance to reiterate the benefits of routine inspection protecting the whole heating system, encouraging clients to consider preventative maintenance, monitoring gas bills, introducing controls and water treatment.”

There is mounting pressure to meet the new energy standards, particularly where tenancies are due for renewal in the first quarter of 2018. Commercial landlords who are still heating their buildings with older boilers and inefficient systems will end up losing out.

The regulations will change again from 1 April 2023 and landlords must not let a non-domestic property if that property has an EPC rating of band F or G.

Source: HVP Magazine

Top of Page


Electricians wanted to fill assessor skills gap

A campaign to recruit more NVQ assessors has been launched by training provider JTL, following concerns of a skills shortage in this area and the negative impact it could have on apprenticeship quality.

A very welcomed rise in the number of apprenticeships has in turn led to an increased need for independent assessors – individuals who can visit an apprentice’s place of work to review their on-site work, provide guidance on their NVQ portfolio and support their development.

However, with a shortage across England and Wales of those currently carrying out this role, the quality of each apprenticeship could be at risk because apprentices are not given the amount of pastoral and technical support they need to progress.

JTL prize the quality of their assessment highly and are keen to ensure that increasing learner numbers do not have a negative impact. Because of the specialised nature of the role, electricians who have already worked ‘on the tools’ in the industry for a number of years are ideally suited to an assessment role, as they are fully versed with current working practices and the industry techniques that an apprentice needs to learn. Those who are able to spend one or two days a week visiting apprentices at work to help progress their NVQ development are being encouraged to apply.

“Becoming an assessor gives you the chance to give something back and, if you’re retired or wanting to take a back seat in your business, allows you to keep in touch with the industry,” said Julie Asher-Smith, human resources director of JTL.

“It’s your opportunity to interact with the industry’s future workforce and allows you to share the experience and skills you’ve gained over the years.

“The skills gap relating to apprentices and electricians has been well documented, but having the right people to assess their training is an important part of the jigsaw. With this campaign we’re taking vital steps to ensure there are sufficient numbers of assessors to develop the next generation of craft professionals.”

Those interested in becoming an assessor are encouraged to contact JTL to find out more. Individuals need to be technically qualified with an apprenticeship or NVQ Level 3 as a minimum, but full support and training related to the role, along with attractive day rates, are provided.

To find out more visit www.jtlassociatesjobs.com

Source: Electrical Times

Top of Page


Homeowners leave themselves at risk by not checking tradesmen’s credentials

According to the latest research by home service marketplace Plentific.com, nearly four out of five homeowners admit that they would hire a trade professional without checking for public liability or professional indemnity insurance.

Hiring a trade professional who does not have the appropriate insurance cover can leave a homeowner financially vulnerable if things go wrong, or if they are dissatisfied with the work carried out.

All home improvement or renovation projects come with some risk. Without public liability insurance, any costs arising from on site injuries or damaged property will fall to the customer to pay. Similarly, if the work carried out, advice given, or specialist services offered by a pro are unsatisfactory, without professional indemnity insurance, the financial costs to amend the project will again fall to the homeowner to organise.

Shockingly, according to the research, only 54% of homeowners check the Gas Safe Register when hiring tradesmen to work on their gas utilities. This percentage drops to 48% for under 55-year-olds, but rises to 60% for homeowners aged 55 and over. Ensuring that a property’s gas utilities are safely maintained is essential to prevent serious hazards or accidents. Checking the Gas Safe Register lets homeowners know whether a trade professional is qualified to legally and safely carry out work on gas appliances.

The research shows that 57% of homeowners believe checking reviews from previous customers is a must before hiring a trade professional. Checking a trade professional’s website also ranked highly, with 43% of respondents claiming that this was a key step when hiring a professional. This trend was stronger for younger homeowners, with 63% of 18 to 34-year-olds following this rule, compared to just 39% of respondents aged 55 or over.

Knowing what to look for when hiring a professional may be daunting for some, so Plentific does all the hard work for the customer when it comes to checking credentials. The ‘Verified Pros’ available through Plentific have been thoroughly vetted to ensure that they have all the appropriate cover for their trades. With the added backing of the Plentific Guarantee, an industry first insurance policy that comes as standard with Verified Pros, homeowners can also benefit from an extra layer of protection if the job doesn’t go to plan.

Stephen Jury, of Plentific, said: “It’s shocking to think that the majority of homeowners aren’t properly checking the tradesmen they let into their homes to carry out renovation or repair work. These projects can be costly, so if something goes wrong, it’s essential to be protected.

“The fact that more homeowners check previous customer reviews over credentials such as the Gas Safe Register, could be surprising to some. However, it shows how much influence people put on real life testimonials and recent customer experiences.”

Source: Heating & Plumbing Monthly Magazine

Top of Page


Turning teens to engineering

According to a survey by Jobsite, the current engineering talent shortfall is driven, not by lack of interest, but by the fact that young people simply do not know how to get started in the field. Indeed, six out of 10 (63%) 16-18 year olds don’t know what qualifications are necessary to become an engineer, while three quarters (74%) didn’t know of any engineering work experience opportunities.

So with more than 50 per cent of respondents expressing a desire to join the industry, the onus is on businesses and schools to bring engineering apprenticeships to the fore.

One company that is already working towards this goal is engineering solutions firm, adi Group, which currently has 19 employees enrolled on its post-16 apprenticeship scheme, and a dozen 14-16 year olds undertaking an adi pre-apprenticeship in partnership with a local school – the first programme of its kind in the UK.

The scheme involves 12 secondary school students – male and female – attending adi Group’s workshop for half a day each week. This occupies 10% of the students’ overall curriculum time as they continue to work on their GCSEs alongside the course. Unfortunately, despite this being the right course of action, these types of partnerships are a rarity.

According to an IAC survey of apprentices, half of all those surveyed found out about their apprenticeship through their own initiative, with a mere 15% finding out from a teacher or careers adviser. In fact, some students are being actively discouraged by their schools to take on apprenticeships, demonstrating the need for employers to work with educational providers to emphasise the value of work-based learning.

Alan Lusty, CEO of adi Group, comments: “We are now seeing a generation of young people seriously considering engineering as a career choice, however, more needs to be done to match students up with high-quality apprenticeship opportunities.

“adi Group’s long term aim is to support the engineering and manufacturing industries by providing a constant stream of young talented people who are well prepared for specialist roles. Our pre-apprenticeship and apprenticeship programmes are clear demonstrations of that intent.

“However, we can’t do it alone. We need more businesses to adopt similar initiatives and increase the number of work experience placements available. As rising numbers of young people are interested in a future in engineering, this is a demand we must meet. As such, the pre-apprenticeship model is completely available, free of charge, for any employer or school that wishes to replicate an existing scheme which has proven to work, and work well.”

For more information, visit www.adiltd.co.uk

Source: Electrical Times

Top of Page


Heating firms called up for £600m Scottish housing deal

Specialist heating contractors from across Scotland are being invited to submit bids to take part in a new social housing framework.

The new panel of firms is being set up to help registered social landlords meet their obligations under the Energy Efficiency Standard for Social Housing.

It is being launched by PfH Scotland, the procurement specialist set up by the National Housing Federation and the Chartered Institute of Housing.

To meet the EESSH standard, all social housing in Scotland must achieve an energy performance certificate (EPC) rating of Band D or better by 2020.

PfH Scotland’s newly-launched framework is expected to generate contract work worth up to £600m over four years across Scotland’s social housing sector.

Following a process of vetting, shortlisting and selecting contractors, the framework is expected to go live in September of this year.

PfH Scotland Head of Operations Stephen Herriot said: “I would encourage heating contractors of all sizes, including those who may have no previous experience of tendering for public sector contracts, to take advantage of the opportunity to participate in this £600m procurement framework and to secure new work while helping drive ongoing improvements in the energy efficiency of Scottish social housing.”

The framework will be split into six defined geographic regions across Scotland.

PfH Scotland is offering a range of bid support and advice for SMEs with limited or no experience of tendering for public sector work.

To further support participation be smaller local contractors, evaluation of tenders will also be 70% weighted in favour of quality and 30% on price.

In each geographic region, the framework has been broken down into 13 individual lots covering services ranging from energy performance certification to domestic and commercial gas servicing and from the installation of renewables to architectural services.

Those tendering can submit responses for any or all of these individual lots and will then be required to identify the geographic areas within each lot that they can service.

Contractors have until the 17 July to register an interest in the framework and to submit their bid.

Further information about the PfH Scotland EESSH heating services framework is available on the Public Contracts Scotland website.

Source: Construction Enquirer

Top of Page


Training will transform building controls industry

The Building Controls Association (BCIA) believes the key to a sustainable future in the building controls industry is to invest in young people and find skilled role models for the next generation.

The current skills shortage faced by the industry has been well documented. A recent survey conducted by UK Construction Week discovered that 67% of respondents identified a lack of knowledge as a serious issue in preventing buildings being run more efficiently, highlighting that more needs to be done in terms of education and training.

To tackle the building performance challenge head-on, building controls engineers must be fully trained to optimise buildings and correctly ascertain which controls will be of most benefit to deliver cost savings and enhance overall comfort.

Technical qualifications called T-levels will be introduced next year for 16-19 year olds following a sizeable investment from the government.

Construction and engineering are set to be two of the key areas which will benefit from this. George Belfield, is an ideal illustration of what a young person can achieve with the right training and guidance.

George recently won the coveted Young Engineer of the Year accolade at the prestigious BCIA Awards 2017 and works for InTandem Systems. Inspired by his older brother who was an electrician, George embarked on an intense training programme and has since gained valuable experience by working on various international projects.

George’s next step is to progress up the ranks and become a building controls engineer as he continues his development in his chosen field. George’s journey has been transformed thanks to obtaining the necessary skills and expertise through ongoing training.

Developing the industry’s talented engineers and retaining them is pivotal. Like George, the industry needs more role models and inspirational figures to encourage and motivate young people to opt for a career in this sector.

Malcolm Anson, president of the BCIA says:” We can all play a significant role in helping shape the future of the building controls industry. Let’s unearth the next crop of controls engineers and demonstrate our passion for the sector. Finding suitable role models will be vital in capturing the imagination of young people who wish to make a career in building controls. We must inspire and educate the next generation to ensure a sustainable future across the whole industry.”

Source: Electrical Times

Top of Page


Fancy being a local hero?

Centrica has launched a new on-demand service, Local Heroes, providing a user-friendly digital platform to find trusted local tradespeople to carry out work in the home. The service currently connects people with local plumbing, heating, electrical and drainage experts.

Local Heroes links the customer-tradespeople journey seamlessly, from searching for a job and providing a price estimate, through to confirmation and online payment. All work that is undertaken via Local Heroes is backed by a 12-month British Gas guarantee.

For tradespeople who are successfully vetted and approved to become Local Heroes, the business model opens up a new revenue stream of work opportunities available within their local area.

Mark Hodges, Chief Executive at Centrica Consumer, comments: “Local Heroes is a perfect example of how we see innovation and new technologies flourishing at Centrica. Local Heroes is the first online platform that offers a complete start-to-finish experience, introducing current and next generation Centrica customers to local tradesmen – crucially, all backed by the peace of mind of a British Gas guarantee.”

There are more than 2500 Local Heroes across the UK. By 2020, the company aims to have completed several hundred thousand jobs in the home via its online platform.

To find out more, click here.

Source: PHAM News

Top of Page


Electrical Trade gets its own focus group

Are you a small business working in the electrical sector who feels that your voice isn’t heard when decisions are being made in the industry that affect you?

If you are, this could be the perfect opportunity for you to get involved in a new venture by Trade Skills 4U to get the voice of the small business heard. Trade Skills 4U is keen to hear from self employed electricians (one-man bands), companies with two to five employees, five to ten employees and trainees and apprentices from these groups.

What is it?

The Small Employer Electrical Focus Group will be made up of approximately 10 people from small businesses and trainees working in the electrical industry.

The group will meet once a quarter to represent the employees and employers of small businesses and self-employed workers in the sector.

The intention is to be able to voice opinions regarding what is needed to make the industry better by training more people with the right skills to ensure they are competent.

The group will be guided by a director from Trade Skills 4U, and its intention is to listen to the opinions of the group and gather information, which can be used to influence future decision making around the electrical industry. This will ensure that future training and qualification changes represent what the industry really needs.

Why is it needed?

It’s hard to believe that even though the electrical industry consists of 90% of small businesses, it’s the 10% of larger businesses that have the most influence when decisions are being made regarding the skills needed for the industry, to ensure that the workers are competent.

This seems to be unbalanced when you consider that the majority of the larger firms don’t actually do the work themselves as they use sub-contractors to carry out an installation.

Trade Skills 4U believes that the small businesses should have a bigger voice when decisions are made, which is why they are interested in forming this Focus Group.

The aim is to be in a position to voice its opinions regarding training needs and reactions to specific industry related issues around qualification content and regulatory changes, with the intention that the views of the group will be considered to help influence the decision making and development needs of the sector.

What are the benefits?

By being part of this Focus Group Trade Skills 4U will give you the inside track regarding what’s happening in the industry and will share with you up-to-date information about forthcoming changes to regulations and qualifications.

Why Trade Skills 4U?

As the UK’s leading electrical training company, Trade Skills 4U has been representing the interests of the thousands of their customers for many years. They have been involved in the development of new qualifications, writing of course books and even provided evidence to Government on behalf of their customers. They already have close ties with accrediting bodies and industry bodies but they believe their voice will be stronger with your help.

If this is something you are interested in please register your interest via the form on this page or email elaine.hammond@tradeskills4u.co.uk.

Source: Electrical Times

Top of Page


Swansea’s £500m city centre regeneration plan approved

Ambitious outline plans to redevelop the heart of Swansea have been approved by the council.

The £500m Swansea Central scheme will see over 11ha redeveloped with the partially demolished St David’s site rebuilt as a new retail destination with a cinema and library.

The council has selected developer Rivington Land and Acme to manage the regeneration of the former St David’s shopping centre and surrounding car parks.

The redevelopment site is divided by the Oystermouth Road. A new wide pedestrian footbridge will connect the triangular southern section of the site.

This is planned to be home to a 3,500-seat arena built on the existing car park next to the LC leisure centre, along with a 13-storey residential block or hotel.

The scheme will need planning permission once plans are finalised, with work hoped to start on the southern site first by summer 2018.

A later phase will involve demolishing the civic centre and creating a city beach, which would also include an aquarium and digital science centre. Trebor Developments will lead the redevelopment of this seafront area.

Source: Construction Enquirer

Top of Page


Blog - Uploader 2